New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[PATCH] Fix typos (spelling errors) in cpan/IO-Compress/*. #10970
Comments
From @pjacklamcpan/IO-Compress/Changes | 16 ++++++++-------- Inline Patchdiff --git a/cpan/IO-Compress/Changes b/cpan/IO-Compress/Changes
index f61463a..995f72b 100644
--- a/cpan/IO-Compress/Changes
+++ b/cpan/IO-Compress/Changes
@@ -117,7 +117,7 @@ CHANGES
2.018 3 May 2009
- * IO::Unompress::Bunzip2
+ * IO::Uncompress::Bunzip2
- The interface to Compress-Raw-Bzip2 now uses the new LimitOutput
feature. This will make all of the bzip2-related IO-Compress modules
less greedy in their memory consumption.
@@ -267,7 +267,7 @@ CHANGES
FNAME & FCOMMENT fields for EBCDIC.
* Compress::Zlib
- lib/Compress/Zlib.pm -- 1.x Backward Compatability issues
+ lib/Compress/Zlib.pm -- 1.x Backward Compatibility issues
gzclose - documented return value was wrong, should be 0 for ok.
gzflush - return value didn't match 1.x, should return 0 if ok.
[rt.cpan.org #29215] and Debian bug #440943 http://bugs.debian.org/440943
@@ -363,7 +363,7 @@ CHANGES
* Add an explicit use_ok test for Scalar::Util in the test harness.
The error message reported by 01misc implied the problem was
somewhere else.
- Also explictly check that 'dualvar' is available.
+ Also explicitly check that 'dualvar' is available.
* Compress::Zlib
- Fix append mode with gzopen.
@@ -386,7 +386,7 @@ CHANGES
Thanks to Andreas J. Koenig for spotting the problem.
* IO::Uncompress::AnyUncompress
- Added IO::Uncompress::Lzf to the list of supported uncompresors.
+ Added IO::Uncompress::Lzf to the list of supported uncompressors.
* IO::Uncompress::Base
Added TrailingData to one-shot interface.
@@ -413,7 +413,7 @@ CHANGES
* IO::Uncompress::UnZip
Tighten up the zip64 extra field processing to cope with the case
- wheere only some of the local header fields are superceeded.
+ where only some of the local header fields are superseded.
* IO::Uncompress::AnyInflate
Remove raw-deflate (RFC 1951) from the default list of compressors
@@ -513,7 +513,7 @@ CHANGES
Changed gzread so that its behaviour matches C::Z::gzread 1.x if it
is called after eof. In this case it will write an empty string
into the output parameter. This change is solely for backward
- compatability reasons.
+ compatibility reasons.
2.000_09 3 March 2006
@@ -667,7 +667,7 @@ Compress-Zlib version 1 Changes
1.31 - 29 October 2003
* Reinstated the creation of .bak files - $^I seems to need a
- backup file on Windows. For OpenVMS, the extenstion _bak is used.
+ backup file on Windows. For OpenVMS, the extension _bak is used.
1.30 - 28 October 2003
@@ -764,7 +764,7 @@ Compress-Zlib version 1 Changes
1.13 - 31st June 2001
- * Make sure config.in is consistant when released.
+ * Make sure config.in is consistent when released.
1.12 - 28th April 2001
diff --git a/cpan/IO-Compress/lib/Compress/Zlib.pm b/cpan/IO-Compress/lib/Compress/Zlib.pm
index d4a5650..9a90d82 100644
--- a/cpan/IO-Compress/lib/Compress/Zlib.pm
+++ b/cpan/IO-Compress/lib/Compress/Zlib.pm
@@ -1007,7 +1007,7 @@ carry out in-memory gzip compression.
This function is used to uncompress an in-memory gzip file.
$dest = Compress::Zlib::memGunzip($buffer)
- or die "Cannot uncomprss: $gzerrno\n";
+ or die "Cannot uncompress: $gzerrno\n";
If successful, it returns the uncompressed gzip file. Otherwise it
returns C<undef> and the C<$gzerrno> variable will store the zlib error
diff --git a/cpan/IO-Compress/lib/File/GlobMapper.pm b/cpan/IO-Compress/lib/File/GlobMapper.pm
index 40a6063..76d4bed 100644
--- a/cpan/IO-Compress/lib/File/GlobMapper.pm
+++ b/cpan/IO-Compress/lib/File/GlobMapper.pm
@@ -31,7 +31,7 @@ $VERSION = '1.000';
our ($noPreBS, $metachars, $matchMetaRE, %mapping, %wildCount);
-$noPreBS = '(?<!\\\)' ; # no preceeding backslash
+$noPreBS = '(?<!\\\)' ; # no preceding backslash
$metachars = '.*?[](){}';
$matchMetaRE = '[' . quotemeta($metachars) . ']';
@@ -309,7 +309,7 @@ sub _parseOutputGlob
if $1 > $maxwild ;
}
- my $noPreBS = '(?<!\\\)' ; # no preceeding backslash
+ my $noPreBS = '(?<!\\\)' ; # no preceding backslash
#warn "noPreBS = '$noPreBS'\n";
#$string =~ s/${noPreBS}\$(\d)/\${$1}/g;
diff --git a/cpan/IO-Compress/lib/IO/Compress/Deflate.pm b/cpan/IO-Compress/lib/IO/Compress/Deflate.pm
index 58b61ab..39f1038 100644
--- a/cpan/IO-Compress/lib/IO/Compress/Deflate.pm
+++ b/cpan/IO-Compress/lib/IO/Compress/Deflate.pm
@@ -394,7 +394,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all compressed data will be appened to
+appending. If the output is a buffer, all compressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
diff --git a/cpan/IO-Compress/lib/IO/Compress/Gzip.pm b/cpan/IO-Compress/lib/IO/Compress/Gzip.pm
index 0e6ea99..217c416 100644
--- a/cpan/IO-Compress/lib/IO/Compress/Gzip.pm
+++ b/cpan/IO-Compress/lib/IO/Compress/Gzip.pm
@@ -512,7 +512,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all compressed data will be appened to
+appending. If the output is a buffer, all compressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
diff --git a/cpan/IO-Compress/lib/IO/Compress/RawDeflate.pm b/cpan/IO-Compress/lib/IO/Compress/RawDeflate.pm
index bec40e0..476f03e 100644
--- a/cpan/IO-Compress/lib/IO/Compress/RawDeflate.pm
+++ b/cpan/IO-Compress/lib/IO/Compress/RawDeflate.pm
@@ -481,7 +481,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all compressed data will be appened to
+appending. If the output is a buffer, all compressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
diff --git a/cpan/IO-Compress/lib/IO/Compress/Zip.pm b/cpan/IO-Compress/lib/IO/Compress/Zip.pm
index 00f4ed9..f4ff03e 100644
--- a/cpan/IO-Compress/lib/IO/Compress/Zip.pm
+++ b/cpan/IO-Compress/lib/IO/Compress/Zip.pm
@@ -893,7 +893,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all compressed data will be appened to
+appending. If the output is a buffer, all compressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -946,7 +946,7 @@ of the files C<alpha.txt> and C<beta.txt>
or die "zip failed: $ZipError\n";
Alternatively, rather than having to explicitly name each of the files that
-you want to comnpress, you could use a fileglob to select all the C<txt>
+you want to compress, you could use a fileglob to select all the C<txt>
files in the current directory, as follows
use strict ;
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/AnyInflate.pm b/cpan/IO-Compress/lib/IO/Uncompress/AnyInflate.pm
index 37d2b16..2cacc3d 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/AnyInflate.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/AnyInflate.pm
@@ -371,7 +371,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -562,7 +562,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/AnyUncompress.pm b/cpan/IO-Compress/lib/IO/Uncompress/AnyUncompress.pm
index c7d5031..2dae2ea 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/AnyUncompress.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/AnyUncompress.pm
@@ -480,7 +480,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -671,7 +671,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Base.pm b/cpan/IO-Compress/lib/IO/Uncompress/Base.pm
index 2814163..7ab27b7 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Base.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Base.pm
@@ -1445,7 +1445,7 @@ IO::Uncompress::Base - Base Class for IO::Uncompress modules
=head1 DESCRIPTION
This module is not intended for direct use in application code. Its sole
-purpose if to to be sub-classed by IO::Unompress modules.
+purpose if to to be sub-classed by IO::Uncompress modules.
=head1 SEE ALSO
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Bunzip2.pm b/cpan/IO-Compress/lib/IO/Uncompress/Bunzip2.pm
index 288ead1..387e689 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Bunzip2.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Bunzip2.pm
@@ -521,7 +521,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Gunzip.pm b/cpan/IO-Compress/lib/IO/Uncompress/Gunzip.pm
index 4b10f4b..ffec7f9 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Gunzip.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Gunzip.pm
@@ -507,7 +507,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -698,7 +698,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Inflate.pm b/cpan/IO-Compress/lib/IO/Uncompress/Inflate.pm
index 27c1d85..3965010 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Inflate.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Inflate.pm
@@ -428,7 +428,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -619,7 +619,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/RawInflate.pm b/cpan/IO-Compress/lib/IO/Uncompress/RawInflate.pm
index 12e915b..d417436 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/RawInflate.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/RawInflate.pm
@@ -576,7 +576,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -764,7 +764,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Unzip.pm b/cpan/IO-Compress/lib/IO/Uncompress/Unzip.pm
index fe75213..1fd44fb 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Unzip.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Unzip.pm
@@ -1009,7 +1009,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -1206,7 +1206,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/pod/FAQ.pod b/cpan/IO-Compress/pod/FAQ.pod
index 671148d..205813e 100644
--- a/cpan/IO-Compress/pod/FAQ.pod
+++ b/cpan/IO-Compress/pod/FAQ.pod
@@ -335,7 +335,7 @@ To illustrate how to use C<InputLength> here is a script that walks a zip
file and prints out how many lines are in each compressed file (if you
intend write code to walking through a zip file for real see
L<IO::Uncompress::Unzip/"Walking through a zip file"> ). Also, although
-this example uses the zlib-based comnpresion, the technique can be used by
+this example uses the zlib-based compression, the technique can be used by
the other C<IO::Uncompress::*> modules.
use strict;
diff --git a/cpan/IO-Compress/t/004gziphdr.t b/cpan/IO-Compress/t/004gziphdr.t
index 210d499..c6fd42a 100644
--- a/cpan/IO-Compress/t/004gziphdr.t
+++ b/cpan/IO-Compress/t/004gziphdr.t
@@ -479,7 +479,7 @@ for my $value ( "0D", "0A", "0A0D", "0D0A", "0A0A", "0D0D")
}
{
- # Check Minimal + no comressed data
+ # Check Minimal + no compressed data
# This is the smallest possible gzip file (20 bytes)
ok my $x = new IO::Compress::Gzip $name, -Minimal => 1;
diff --git a/cpan/IO-Compress/t/compress/generic.pl b/cpan/IO-Compress/t/compress/generic.pl
index 54abab0..d74f0e1 100644
--- a/cpan/IO-Compress/t/compress/generic.pl
+++ b/cpan/IO-Compress/t/compress/generic.pl
@@ -347,7 +347,7 @@ EOM
my $x ;
my $uncomp ;
my $stdinFileno = fileno(STDIN);
- # open below doesn't return 1 sometines on XP
+ # open below doesn't return 1 sometimes on XP
open(SAVEIN, "<&STDIN");
ok open(STDIN, "<$name"), " redirect STDIN";
my $dummy = fileno SAVEIN;
@@ -888,7 +888,7 @@ EOT
is $io->input_line_number, 2;
ok $io->eof;
ok @lines == 2
- or print "# exected 2 lines, got " . scalar(@lines) . "\n";
+ or print "# executed 2 lines, got " . scalar(@lines) . "\n";
ok $lines[0] eq "This is an example\nof a paragraph\n\n\n"
or print "# [$lines[0]]\n" ;
ok $lines[1] eq "and a single line.\n\n";
diff --git a/cpan/IO-Compress/t/compress/tied.pl b/cpan/IO-Compress/t/compress/tied.pl
index 80d42b7..1ee4ff8 100644
--- a/cpan/IO-Compress/t/compress/tied.pl
+++ b/cpan/IO-Compress/t/compress/tied.pl
@@ -369,7 +369,7 @@ EOT
my @lines = <$io>;
ok $io->eof;
ok @lines == 2
- or print "# exected 2 lines, got " . scalar(@lines) . "\n";
+ or print "# executed 2 lines, got " . scalar(@lines) . "\n";
ok $lines[0] eq "This is an example\nof a paragraph\n\n\n"
or print "# [$lines[0]]\n" ;
ok $lines[1] eq "and a single line.\n\n";
diff --git a/cpan/IO-Compress/t/cz-03zlib-v1.t b/cpan/IO-Compress/t/cz-03zlib-v1.t
index cb9ff1f..677d141 100644
--- a/cpan/IO-Compress/t/cz-03zlib-v1.t
+++ b/cpan/IO-Compress/t/cz-03zlib-v1.t
@@ -494,7 +494,7 @@ EOM
ok ! defined $ungzip ;
cmp_ok $gzerrno, "==", Z_DATA_ERROR ;
- # corrupt header - reserverd bits used
+ # corrupt header - reserved bits used
$bad = $keep ;
substr($bad, 3, 1) = "\xFF" ;
$ungzip = memGunzip(\$bad) ;
diff --git a/cpan/IO-Compress/t/cz-14gzopen.t b/cpan/IO-Compress/t/cz-14gzopen.t
index fa05a9f8..89b04ff 100644
--- a/cpan/IO-Compress/t/cz-14gzopen.t
+++ b/cpan/IO-Compress/t/cz-14gzopen.t
@@ -249,7 +249,7 @@ EOM
}
{
- title "a text file which is not termined by an EOL";
+ title "a text file which is not terminated by an EOL";
my $lex = new LexFile my $name ;
--
1.7.3.3 |
From @pmqsThanks, applid to my development copy. -----Original Message----- # New Ticket Created by (Peter J. Acklam) cpan/IO-Compress/Changes | 16 ++++++++-------- Inline Patchdiff --git a/cpan/IO-Compress/Changes b/cpan/IO-Compress/Changes
index f61463a..995f72b 100644
--- a/cpan/IO-Compress/Changes
+++ b/cpan/IO-Compress/Changes
@@ -117,7 +117,7 @@ CHANGES
2.018 3 May 2009
- * IO::Unompress::Bunzip2
+ * IO::Uncompress::Bunzip2
- The interface to Compress-Raw-Bzip2 now uses the new LimitOutput
feature. This will make all of the bzip2-related IO-Compress modules
less greedy in their memory consumption.
@@ -267,7 +267,7 @@ CHANGES
FNAME & FCOMMENT fields for EBCDIC.
* Compress::Zlib
- lib/Compress/Zlib.pm -- 1.x Backward Compatability issues
+ lib/Compress/Zlib.pm -- 1.x Backward Compatibility issues
gzclose - documented return value was wrong, should be 0 for ok.
gzflush - return value didn't match 1.x, should return 0 if ok.
[rt.cpan.org #29215] and Debian bug #440943 http://bugs.debian.org/440943
@@ -363,7 +363,7 @@ CHANGES
* Add an explicit use_ok test for Scalar::Util in the test harness.
The error message reported by 01misc implied the problem was
somewhere else.
- Also explictly check that 'dualvar' is available.
+ Also explicitly check that 'dualvar' is available.
* Compress::Zlib
- Fix append mode with gzopen.
@@ -386,7 +386,7 @@ CHANGES
Thanks to Andreas J. Koenig for spotting the problem.
* IO::Uncompress::AnyUncompress
- Added IO::Uncompress::Lzf to the list of supported uncompresors.
+ Added IO::Uncompress::Lzf to the list of supported uncompressors.
* IO::Uncompress::Base
Added TrailingData to one-shot interface.
@@ -413,7 +413,7 @@ CHANGES
* IO::Uncompress::UnZip
Tighten up the zip64 extra field processing to cope with the case
- wheere only some of the local header fields are superceeded.
+ where only some of the local header fields are superseded.
* IO::Uncompress::AnyInflate
Remove raw-deflate (RFC 1951) from the default list of compressors
@@ -513,7 +513,7 @@ CHANGES
Changed gzread so that its behaviour matches C::Z::gzread 1.x if it
is called after eof. In this case it will write an empty string
into the output parameter. This change is solely for backward
- compatability reasons.
+ compatibility reasons.
2.000_09 3 March 2006
@@ -667,7 +667,7 @@ Compress-Zlib version 1 Changes
1.31 - 29 October 2003
* Reinstated the creation of .bak files - $^I seems to need a
- backup file on Windows. For OpenVMS, the extenstion _bak is used.
+ backup file on Windows. For OpenVMS, the extension _bak is used.
1.30 - 28 October 2003
@@ -764,7 +764,7 @@ Compress-Zlib version 1 Changes
1.13 - 31st June 2001
- * Make sure config.in is consistant when released.
+ * Make sure config.in is consistent when released.
1.12 - 28th April 2001
diff --git a/cpan/IO-Compress/lib/Compress/Zlib.pm b/cpan/IO-Compress/lib/Compress/Zlib.pm
index d4a5650..9a90d82 100644
--- a/cpan/IO-Compress/lib/Compress/Zlib.pm
+++ b/cpan/IO-Compress/lib/Compress/Zlib.pm
@@ -1007,7 +1007,7 @@ carry out in-memory gzip compression.
This function is used to uncompress an in-memory gzip file.
$dest = Compress::Zlib::memGunzip($buffer)
- or die "Cannot uncomprss: $gzerrno\n";
+ or die "Cannot uncompress: $gzerrno\n";
If successful, it returns the uncompressed gzip file. Otherwise it
returns C<undef> and the C<$gzerrno> variable will store the zlib error
diff --git a/cpan/IO-Compress/lib/File/GlobMapper.pm b/cpan/IO-Compress/lib/File/GlobMapper.pm
index 40a6063..76d4bed 100644
--- a/cpan/IO-Compress/lib/File/GlobMapper.pm
+++ b/cpan/IO-Compress/lib/File/GlobMapper.pm
@@ -31,7 +31,7 @@ $VERSION = '1.000';
our ($noPreBS, $metachars, $matchMetaRE, %mapping, %wildCount);
-$noPreBS = '(?<!\\\)' ; # no preceeding backslash
+$noPreBS = '(?<!\\\)' ; # no preceding backslash
$metachars = '.*?[](){}';
$matchMetaRE = '[' . quotemeta($metachars) . ']';
@@ -309,7 +309,7 @@ sub _parseOutputGlob
if $1 > $maxwild ;
}
- my $noPreBS = '(?<!\\\)' ; # no preceeding backslash
+ my $noPreBS = '(?<!\\\)' ; # no preceding backslash
#warn "noPreBS = '$noPreBS'\n";
#$string =~ s/${noPreBS}\$(\d)/\${$1}/g;
diff --git a/cpan/IO-Compress/lib/IO/Compress/Deflate.pm b/cpan/IO-Compress/lib/IO/Compress/Deflate.pm
index 58b61ab..39f1038 100644
--- a/cpan/IO-Compress/lib/IO/Compress/Deflate.pm
+++ b/cpan/IO-Compress/lib/IO/Compress/Deflate.pm
@@ -394,7 +394,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all compressed data will be appened to
+appending. If the output is a buffer, all compressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
diff --git a/cpan/IO-Compress/lib/IO/Compress/Gzip.pm b/cpan/IO-Compress/lib/IO/Compress/Gzip.pm
index 0e6ea99..217c416 100644
--- a/cpan/IO-Compress/lib/IO/Compress/Gzip.pm
+++ b/cpan/IO-Compress/lib/IO/Compress/Gzip.pm
@@ -512,7 +512,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all compressed data will be appened to
+appending. If the output is a buffer, all compressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
diff --git a/cpan/IO-Compress/lib/IO/Compress/RawDeflate.pm b/cpan/IO-Compress/lib/IO/Compress/RawDeflate.pm
index bec40e0..476f03e 100644
--- a/cpan/IO-Compress/lib/IO/Compress/RawDeflate.pm
+++ b/cpan/IO-Compress/lib/IO/Compress/RawDeflate.pm
@@ -481,7 +481,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all compressed data will be appened to
+appending. If the output is a buffer, all compressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
diff --git a/cpan/IO-Compress/lib/IO/Compress/Zip.pm b/cpan/IO-Compress/lib/IO/Compress/Zip.pm
index 00f4ed9..f4ff03e 100644
--- a/cpan/IO-Compress/lib/IO/Compress/Zip.pm
+++ b/cpan/IO-Compress/lib/IO/Compress/Zip.pm
@@ -893,7 +893,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all compressed data will be appened to
+appending. If the output is a buffer, all compressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -946,7 +946,7 @@ of the files C<alpha.txt> and C<beta.txt>
or die "zip failed: $ZipError\n";
Alternatively, rather than having to explicitly name each of the files that
-you want to comnpress, you could use a fileglob to select all the C<txt>
+you want to compress, you could use a fileglob to select all the C<txt>
files in the current directory, as follows
use strict ;
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/AnyInflate.pm b/cpan/IO-Compress/lib/IO/Uncompress/AnyInflate.pm
index 37d2b16..2cacc3d 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/AnyInflate.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/AnyInflate.pm
@@ -371,7 +371,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -562,7 +562,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/AnyUncompress.pm b/cpan/IO-Compress/lib/IO/Uncompress/AnyUncompress.pm
index c7d5031..2dae2ea 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/AnyUncompress.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/AnyUncompress.pm
@@ -480,7 +480,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -671,7 +671,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Base.pm b/cpan/IO-Compress/lib/IO/Uncompress/Base.pm
index 2814163..7ab27b7 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Base.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Base.pm
@@ -1445,7 +1445,7 @@ IO::Uncompress::Base - Base Class for IO::Uncompress modules
=head1 DESCRIPTION
This module is not intended for direct use in application code. Its sole
-purpose if to to be sub-classed by IO::Unompress modules.
+purpose if to to be sub-classed by IO::Uncompress modules.
=head1 SEE ALSO
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Bunzip2.pm b/cpan/IO-Compress/lib/IO/Uncompress/Bunzip2.pm
index 288ead1..387e689 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Bunzip2.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Bunzip2.pm
@@ -521,7 +521,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Gunzip.pm b/cpan/IO-Compress/lib/IO/Uncompress/Gunzip.pm
index 4b10f4b..ffec7f9 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Gunzip.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Gunzip.pm
@@ -507,7 +507,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -698,7 +698,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Inflate.pm b/cpan/IO-Compress/lib/IO/Uncompress/Inflate.pm
index 27c1d85..3965010 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Inflate.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Inflate.pm
@@ -428,7 +428,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -619,7 +619,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/RawInflate.pm b/cpan/IO-Compress/lib/IO/Uncompress/RawInflate.pm
index 12e915b..d417436 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/RawInflate.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/RawInflate.pm
@@ -576,7 +576,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -764,7 +764,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/lib/IO/Uncompress/Unzip.pm b/cpan/IO-Compress/lib/IO/Uncompress/Unzip.pm
index fe75213..1fd44fb 100644
--- a/cpan/IO-Compress/lib/IO/Uncompress/Unzip.pm
+++ b/cpan/IO-Compress/lib/IO/Uncompress/Unzip.pm
@@ -1009,7 +1009,7 @@ data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any uncompressed data. If the output is a filename, it will be opened for
-appending. If the output is a buffer, all uncompressed data will be appened to
+appending. If the output is a buffer, all uncompressed data will be appended to
the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
@@ -1206,7 +1206,7 @@ the module will allow reading of it anyway.
In addition, if the input file/buffer does contain compressed data and
there is non-compressed data immediately following it, setting this option
-will make this module treat the whole file/bufffer as a single data stream.
+will make this module treat the whole file/buffer as a single data stream.
This option defaults to 1.
diff --git a/cpan/IO-Compress/pod/FAQ.pod b/cpan/IO-Compress/pod/FAQ.pod
index 671148d..205813e 100644
--- a/cpan/IO-Compress/pod/FAQ.pod
+++ b/cpan/IO-Compress/pod/FAQ.pod
@@ -335,7 +335,7 @@ To illustrate how to use C<InputLength> here is a script that walks a zip
file and prints out how many lines are in each compressed file (if you
intend write code to walking through a zip file for real see
L<IO::Uncompress::Unzip/"Walking through a zip file"> ). Also, although
-this example uses the zlib-based comnpresion, the technique can be used by
+this example uses the zlib-based compression, the technique can be used by
the other C<IO::Uncompress::*> modules.
use strict;
diff --git a/cpan/IO-Compress/t/004gziphdr.t b/cpan/IO-Compress/t/004gziphdr.t
index 210d499..c6fd42a 100644
--- a/cpan/IO-Compress/t/004gziphdr.t
+++ b/cpan/IO-Compress/t/004gziphdr.t
@@ -479,7 +479,7 @@ for my $value ( "0D", "0A", "0A0D", "0D0A", "0A0A", "0D0D")
}
{
- # Check Minimal + no comressed data
+ # Check Minimal + no compressed data
# This is the smallest possible gzip file (20 bytes)
ok my $x = new IO::Compress::Gzip $name, -Minimal => 1;
diff --git a/cpan/IO-Compress/t/compress/generic.pl b/cpan/IO-Compress/t/compress/generic.pl
index 54abab0..d74f0e1 100644
--- a/cpan/IO-Compress/t/compress/generic.pl
+++ b/cpan/IO-Compress/t/compress/generic.pl
@@ -347,7 +347,7 @@ EOM
my $x ;
my $uncomp ;
my $stdinFileno = fileno(STDIN);
- # open below doesn't return 1 sometines on XP
+ # open below doesn't return 1 sometimes on XP
open(SAVEIN, "<&STDIN");
ok open(STDIN, "<$name"), " redirect STDIN";
my $dummy = fileno SAVEIN;
@@ -888,7 +888,7 @@ EOT
is $io->input_line_number, 2;
ok $io->eof;
ok @lines == 2
- or print "# exected 2 lines, got " . scalar(@lines) . "\n";
+ or print "# executed 2 lines, got " . scalar(@lines) . "\n";
ok $lines[0] eq "This is an example\nof a paragraph\n\n\n"
or print "# [$lines[0]]\n" ;
ok $lines[1] eq "and a single line.\n\n";
diff --git a/cpan/IO-Compress/t/compress/tied.pl b/cpan/IO-Compress/t/compress/tied.pl
index 80d42b7..1ee4ff8 100644
--- a/cpan/IO-Compress/t/compress/tied.pl
+++ b/cpan/IO-Compress/t/compress/tied.pl
@@ -369,7 +369,7 @@ EOT
my @lines = <$io>;
ok $io->eof;
ok @lines == 2
- or print "# exected 2 lines, got " . scalar(@lines) . "\n";
+ or print "# executed 2 lines, got " . scalar(@lines) . "\n";
ok $lines[0] eq "This is an example\nof a paragraph\n\n\n"
or print "# [$lines[0]]\n" ;
ok $lines[1] eq "and a single line.\n\n";
diff --git a/cpan/IO-Compress/t/cz-03zlib-v1.t b/cpan/IO-Compress/t/cz-03zlib-v1.t
index cb9ff1f..677d141 100644
--- a/cpan/IO-Compress/t/cz-03zlib-v1.t
+++ b/cpan/IO-Compress/t/cz-03zlib-v1.t
@@ -494,7 +494,7 @@ EOM
ok ! defined $ungzip ;
cmp_ok $gzerrno, "==", Z_DATA_ERROR ;
- # corrupt header - reserverd bits used
+ # corrupt header - reserved bits used
$bad = $keep ;
substr($bad, 3, 1) = "\xFF" ;
$ungzip = memGunzip(\$bad) ;
diff --git a/cpan/IO-Compress/t/cz-14gzopen.t b/cpan/IO-Compress/t/cz-14gzopen.t
index fa05a9f8..89b04ff 100644
--- a/cpan/IO-Compress/t/cz-14gzopen.t
+++ b/cpan/IO-Compress/t/cz-14gzopen.t
@@ -249,7 +249,7 @@ EOM
}
{
- title "a text file which is not termined by an EOL";
+ title "a text file which is not terminated by an EOL";
my $lex = new LexFile my $name ;
--
1.7.3.3 |
The RT System itself - Status changed from 'new' to 'open' |
@iabyn - Status changed from 'open' to 'resolved' |
Migrated from rt.perl.org#81816 (status was 'resolved')
Searchable as RT81816$
The text was updated successfully, but these errors were encountered: